Verify Beacons Sent

To verify whether the beacons are being sent by the tracker, go to your browser’s developer tools.

• Chrome: Press CTRL + SHIFT + J while viewing the page to debug
• Firefox: Press CTRL + SHIFT + K while viewing the page to debug
• Microsoft Edge: Press F12 while viewing the page to debug

In the console tab, make sure there are no errors displayed when the function for sending the beacon (e.g. sendAutoSearchEvent) is called.

• If there is error output, the beacon was not sent. The error output describes the reason the beacon did not pass validation. This is usually from missing properties.

• If there is no output (no errors), the beacon was sent.

Note: In the network tab, a 200 response from the /wisdom/v2/pixel endpoint when the function for sending the beacon is called indicates that the beacon was sent to GroupBy servers.

• If there is no Img request with a 200 response from the /wisdom/v2/pixel endpoint, the beacon was not sent.

• If there is at least one Img request with a 200 response from the /wisdom/v2/pixel endpoint, the beacon was sent. Larger beacons are split into multiple pixel segments as they are sent.